How Drywall Repair Process Carried Out

Before this short informational article unveils how the process proceeds, let’s quickly have a look at the inventory. The drywall repair matthews nc technician will be bring specialist sanders and saws to the work site. They will also be using dust masks, paintbrushes, screw guns and taping and utility knives. Other materials required will be screws and tape. Paper tape is preferred because mesh tape is considered to be too weak.

drywall repair matthews nc

Quite possibly, the most important material in this inventory will be the compound. It is usual to utilize a full gallon tub of drywall compound for a single repair or installation job. But if a number of repairs are required on site, the technicians will be packing in a sack of twenty-minute setting compound. This compound hardens pretty quickly and will not shrink. It is perfect for filling cracks and gaps before applying any tape.

The very first job on site is to measure the thickness of the drywall. A huge scrap from a damaged area can be utilized to fix a hole in the drywall. This scrap will be cut to size. It will be screwed into place. The screws need to be spaced every six inches. The edges of patched drywall will need to be taped to make it invisible. The smoothest results are achieved when flexible six to ten inch taping knives are being used.

After a coat of compound has been applied, same will be taped to each created joint. The compound is thinned with a small amount of water in order to embed the tape. This tape is smoothed with the knife. Some of the compound is squeezed out from under the tape. After that, a light coating is applied to the surface.